ADSP 8
30
30
1. Setting Type
Click cut low (HPF) or high-cut (LPF9 filter type options dropdown and
choose, including:
A, Butterworth (Butterworth)
B, NikKe (Linkwitz – Riley)
C, The queue (Bessel)
2. Frequency Settings
You can put values directly, rolling the mouse wheel and use the keyboard
up-down buttons to adjust the Low-cut or High-cut frequency.
Adjusting range:
A. High-cut frequency: 20Hz ~ 20kHz
B. Low-cut frequency: 20kHz ~ 20Hz
3. Slope Settings
Click Low-cut (HPF) or High-cut (LPF) filter slope options dropdown button
and choose, thereare 12dB/Oct, 24dB/Oct, 36dB/Oct, 42dB/Oct, 48dB/Oct,
OFF and other options.
10.6.5. Output Phase Area
10.6.6. Space and Time Delay Area
You can set time delay and space for all the channels putting the data
calculated by you. When edit current channel time delay and distance, only input
values in the white text area of the selected output channel time delay setting
area for time delay, metric distance and inch distance delay.
A. Time delay: 0.00 to 20.00 ms.
B. Metric distance delay: 0.00 to 692.00 CM.
Click the “polar” button and switch the phase
from 0 to 180°.
