ADSP 8
28
28
10.6.2. Output Channel Setting Area
CH1 to CH8 Output Configuration:
In the unlocked state, click the middle of CH1 and CN8 and a menu will
pop-up to configure the output speaker’s location. You can select the output
channel configuration intuitively, and the configuration up to 24. The elected
channel will be displayed in green and at the same time, the system will be
automatically blocked until further changes.
Output Channels Mute Setting:
Left click
icon, then change
as mute state, and click gain to
cancel mute.
Reset Output Setting Buttons:
(Reset Output Map button)
To empty or restore the default settings. Left click and pop-up hint dialog,
according to the prompt dialog, “empty” button to set the CH1 to CH8 channel for
empty; “default” button set output channel as default setting. Press “cancel”
button to exit the dialog.
End of Setting Procedure:
(Lock output setting button)
Click the button “Lock output map” then OK to lock or unlock from CH1 to
CH8 setting.
