ADSP 8
25
25
Frequency:
Parametric EQ mode, you can input values, scroll the mouse wheel and
up-down buttons of the keyboard, etc and other ways to adjust the frequency
(range: 20HZ – 20000Hz) directly; graphic equilibrium model, the frequency is the
1/3 octave frequency of the default allocation.
Q value:
Parametric EQ mode, you can input values, scroll the mouse wheel and
up-down buttons of the keyboard, etc and other ways to adjust the Q value
(range: 0.404 -28.85) directly. Graphics equilibrium model, the Q value is the 1/3
octave frequency of the default allocation.
Gain:
You can input values, scroll the mouse wheel and up-down buttons of the
keyboard, etc and other ways to adjust the gain (adjustment range: -12.0dB –
12.0dB). Or drag the pusher directly to adjust the gain.
Pass:
There are 31-band pass buttons, click EQ “pass” buttons to pss this period
of EQ..
Bypass all EQ buttons (recover all the EQ buttons):
Click this button, then choose “YES” on the pop-up prompt dialog box and
all the 31-band will be balanced (only change the gain value, don’t change the
frequency and Q value of distribution value. The button will turn to “restore all
balance” once gain through all the equalizers, and all the equalizer parameters
you can return to the previous data. Click “restore all balance” and turn back to
the previous without going through the equalization state.
Reset EQ:
Click this button, the pop-up confirmation dialog box, press “YES” button
and reset all 31-b1nd equalizer. (frequency Rate, Q value and gain vakues are
reset to the preset state, which is a third time frequency distribution).
Note:
after resetting it isn’t possible to go back!
