Device menu
37
System Settings
Note
The “System Settings” menu is used to manage
all device settings.
Warning
Ensure that the date and time are set correctly.
IMPORTANT:
Subsequent changes to the settings can lead to
data loss!
Ensure a data backup has been made in good
time beforehand.
Overview
Menu
Setting
Page
General
Language, video, time, date,
mouse pointer, password, time
zones and other settings
Camera
Adding, changing and selecting
analogue and IP cameras
38
Record
All recording settings (type,
resolution, motion detection,
schedule etc.)
23
Network
Required network settings
(manual IP, DHCP, PPPOE,
DDNS etc.) and network status
overview
46
Alarm
Assignment and parameterisa-
tion of detectors to alarm inputs
and relay outputs
51
PTZ
PTZ hardware parameters and
assignment to camera inputs
27
Menu
Setting
Page
RS232
Parameters on the serial connec-
tion
40
Display
Display settings and assignment
of the event output
22
Exception Behaviour of the device in excep-
tional cases (HDD full, network
disconnected etc.)
41
User
Adding and changing users, as-
signing authorisation rights
41
Note
Pay attention to the instructions in the correspond-
ing sections.
General Settings
22
“General” tab
Setting
Language
Language on the OSD
CVBS Output
Standard
PAL / NTSC
VGA Resolu-
tion
Resolution on the monitor
Time Zone
GMT (Greenwich Mean Time)
Menu Date
Format
MM-DD-YYYY, DD-MM-YYYY,
YYYY-MM-DD
System Time
Date and time
Mouse Pointer
Speed
Set on the scroll bar (left =
low speed; right = high speed)
Enable Pass-
word
Box not checked: No password
Box checked: Password must be en-
tered in order to use the menu