Abus TVVR45020 User Manual Download

Page: 43 / 61

Device menu

Maintenance

Note

This menu is used for device maintenance, and
should only be operated by experienced users.

Setting

Pag
e

Upgrade

Carries out a firmware up-
grade

Log Search

A search of recordings or in-
formation (S.M.A.R.T. HDD
status) can be made in the log
file according to certain criteria
(alarms, exceptions, operation
or information).

Default System

reset

Configuration Used to export or import the

settings

Information

Device information (serial
number, firmware status etc.)

Upgrading the device

Note

A device upgrade can be made from a USB de-
vice or over the network via FTP.

•

Copy the upgrade file to the main directory of a

USB stick.

•

Connect the USB stick to a USB port on the

device.

1. Select the USB port (click on “Refresh”, if neces-

sary).

2.  Select the upgrade file and click on “Upgrade”.
3.  Wait until the device reboots.
4.  Check the firmware status in the “Maintenance”

menu under “Information”.

Note

•

Upgrades via FTP are made in the same way

as detailed above. The PC must be located in
the same local network.

•

Set up a PC as an FTP server.

•

Enter the IP address of the FTP server.

Summary of Contents for TVVR45020






























































Search results

Summary of Contents for TVVR45020

Reviews:

Related manuals for TVVR45020

Brands by name

Popular brands

Abus TVVR45020, User Manual

Search results

Summary of Contents for TVVR45020

Reviews:

Related manuals for TVVR45020

Brands by name

Popular brands