Abus TVVR35002 User Manual Download Page 7

Page: 7 / 66

Important safety information

Installation



Observe all safety and operating instructions before
installing the device for the first time.



Only open the housing to install the hard disk drive.



Only install the software on devices that are ex-
pressly suitable for the intended purpose. Otherwise,
damage to the device can occur.

Note

Compatible devices:
-

TVVR35002

TVVR35011

TVVR45021

TVVR45030

TVVR60011

TVVR60021

Warning

If in doubt, have the device installed by a special-
ist technician.

Children



Do not allow electrical devices to be handled by chil-
dren. Do not allow children to use electrical devices
unsupervised. Children may not properly identify pos-
sible hazards. Small parts may be fatal if swallowed.



Keep packaging film away from children. Risk of suf-
focation.



This device is not intended for children. If used incor-
rectly, parts under spring tension may fly out and
cause injury to children (e.g to eyes).

Summary of Contents for TVVR35002



































































Search results

Summary of Contents for TVVR35002

Reviews:

Related manuals for TVVR35002

Brands by name

Popular brands

Abus TVVR35002, User Manual

Search results

Summary of Contents for TVVR35002

Reviews:

Related manuals for TVVR35002

Brands by name

Popular brands