Abus TVVR35002 User Manual Download Page 47

Page: 47 / 66

HDD

Hard disk drives

Note

The installed hard disk drives have to be initialised
before the device can be used for recording. It is
only then that the device will recognise the hard
disk drive.

Warning

All data will be deleted from the hard disk drive
during initialisation.

Ensure data is backed up promptly.

Click on "HDD" in the menu to adjust settings relating to
management of the hard disk drive.

General

HDD Information Description

Label

Shows the internal connection
number.

Capacity

Hard disk drive capacity (in GB).

Status

Shows the current status of the
hard disk drives:

Not initialised

Normal

Error

Standby

Features



Read-only: write protection



R/W: read and write

Type

Local: device hard disk drive

Free Space

Shows the approximate amount of
free memory for recordings

Group

Group ID

Edit

Delete

Remove the hard disk drive.

Initialising the hard disk drive

1. Select the hard disk drive by ticking the box.

2. Click on

Init

to start the process.

3. Click on

to acknowledge the security prompt.

4. The status bar will show the progress of the initialisa-

tion.

5. Once the process has finished, the hard disk drive

will appear.

Add NetHDD

Additional data storage devices can be added to enable
storage across the network.

Click on

Add

to add a NetHDD.

Note

If the installed hard disk drive is not displayed,
check the connections.

Warning

When using NetHDDs, ensure that your network is
of a sufficient size.

Note

The playback of recorded data may be slower if
you use NetHDDs than if you are using the inter-
nal hard disk drives.

Summary of Contents for TVVR35002



































































Search results

Summary of Contents for TVVR35002

Reviews:

Related manuals for TVVR35002

Brands by name

Popular brands

Abus TVVR35002, User Manual

Search results

Summary of Contents for TVVR35002

Reviews:

Related manuals for TVVR35002

Brands by name

Popular brands