background image

 

English 

1.  Introduction 

 

Dear customer, 
We are pleased that you have chosen our product and thank you for your trust! You 
made a good choice. 
This Magnetic contact (hereinafter referred to as the "device") has been developed and 
manufactured  with  the  utmost  care.  Please  read  these  operating  instructions 
completely and observe all operating and safety instructions, as this ensures the best 
possible  handling  of  the  device.  This  document  is  an  installation  and  maintenance 
manual. 
 
All contained company names and product designations are trademarks of the 
respective owners. All rights reserved. 
If you have any questions, please contact your specialist installer or specialist trade 
partner! 
 

1.1.  Declaration of Conformity 

ABUS Security-Center hereby declares that the enclosed product comply with 
the requirements of the following directives 

 

RED  Directive  (2014/53/EU),  EMC  Directive  (2014/30/EU),  Low  Voltage  Directive 
(2014/35/EU)  and  RoHS  Directive  (2011/65/EU).  The  full  EU  Declaration  of 
Conformity text can be found at:  

 

www.abus.com/product/SHMK10000

 

 

It can also be obtained at the following adress: 

ABUS Security-Center GmbH & Co. KG, 

Linker Kreuthweg 5, 86444 Affing, GERMANY 

 

1.2.  Disclaimer of Liability 

These operating instructions have been prepared with the greatest care. Should you 
nevertheless notice omissions or inaccuracies, please inform us in writing at the above 
address. 

Your rights are limited to the repair or replacement of this product as delivered. ABUS 
Security  Center  assumes  no  liability  for  any  special,  incidental  or  consequential 
damages, including but not limited to loss of revenue, loss of profit, restrictions in the 
use  of  the  software,  loss  or  recovery  of  data,  costs  for  replacement  equipment, 
downtime, property damage and claims of third parties, as a result of and in connection 
with  the  use  of  the  software.a.  warranty,  contractual,  legal  or  claims  for  damages 
notwithstanding  other  limited  or  implied  warranty  provisions  or  in  the  event  that  the 
limited warranty does not apply, the scope of liability of ABUS Security Center is limited 
to the purchase price of the product. 

The contents of this manual are subject to change without notice. 

© ABUS Security-Center GmbH & Co. KG, 09/2018 

 

Summary of Contents for SHMK10000













Reviews: