[17]
wAppLoxx Pro
–
installation instructions and user guide
Changing the inner extension connector
Twist the inner extension connector (8) out of the
outer extension connector (11)
Changing the inner extension connector
Screw the desired inner extension connector (8) into
the outer extension connector (11). There is a
specific extension connector (30 mm
–
90 mm) (8) for
every inner length.
Fitting the extension pieces
Push the desired extension piece (9) together with
the corresponding shaft extension (7) onto the
extension connector (8) until it makes contact with
the outer extension connector (11), and thereby
secure the cam (10).
Tightening the cylinder body
Secure the grub screw in the outer cylinder body (5).
Pushing on the shaft for the mechanical inner knob
Slide the shaft end piece (12) or outer knob (1) into
the outer cylinder body (5).
