[20]
wAppLoxx Pro
–
installation instructions and user guide
Changing the outer extension connector
Twist the inner extension connector (8) out of
the outer extension connector (11). To do this,
first remove the core retaining ring on the
inside (see above). Screw the inner extension
connector into the desired outer extension
connector.
There is a specific extension connector
(30 mm
–
90 mm) (8) for every outer length.
Fitting the extension pieces
Push the desired extension piece (9)
together with the corresponding shaft
extension (7) onto the extension connector (8)
until it makes contact with the outer extension
connector (11), and thereby secure the cam
(10).
Tightening the cylinder body
Secure the grub screw in the outer cylinder
body (5).
Sliding on the electronic knob with shaft
Slide the shaft end piece (12) or outer knob (1)
into the outer cylinder body (5).