![background image](http://html.mh-extra.com/html/samsung/shp-h20/shp-h20_user-manual_349265001.webp)
6
5
4
3
2
Key Tag Registration
3. Exit Registration Mode
In order to open from indoors,
push the Inner Handle downwards to unlock.
SHP-H20
PTMP5800ONTB ED:00
Door open /
Warning LED
Touch the out body unit number pad
to lock the door.
smarthome.samsungsds.com
Easy access with PIN code and Key tag
Convenient Door Opening
Silent Mode
When going in or out, the sound of the
key entering and door opening will be
suspended.
Automatic Key Tag Reading Function
When a user places a key tag on the reader,
it automatically recognizes the key tag.
2-Step Authentication Mode
Both PIN code and key tag need to be authenticated
to open the door, ensuring a higher level of security.
Privacy Mode
Unlocking the door from outside is prevented while
someone is inside.
Away Mode
After a user goes out, this function generates
alarm sound when an attempt is made to open
the door from the inside.
High Temperature Alarm
When the built-in sensor detects abnormal
high-temperature, the alarm will be triggered,
and the doorlock will be automatically unlocked
to allow fast escape.
※
The information of this user manual is subject to change without any
notices to improve the performance of this product.
※
Customer’s improper installation may result in a additional service costs.
We highly recommend professional installation.
Warning
Safety Precautions
This section contains important information to ensure the user’s safety
and prevent potential damage to property.
Please, read this section carefully and use the product accordingly.
• The installation and repair should be done
by the professional installer or service
person.
• Do not install the product in the place
where the gap between the door and the
frame is 5 mm or more.
• Long-term exposure to direct sunlight
may cause a crack on its touch pad.
Avoid exposure to direct sunlight.
• Do not use the excessive force or sharp
objects to push the lock buttons, as this
can damage the product.
• Do not operate the product with wet
hands, and keep liquids such as water
or drinks away from the product, or the
product may malfunction or be damaged.
• Do not use water, benzene or alcohol
when cleaning the product, but use a soft
dry cloth.
• Make sure that the door is completely
closed when going outside.
• Make sure that no unauthorized person
has the access to the PIN code .
Change it regularly.
• Be sure to correctly match the battery
polarities (+/-) when installing the batteries.
Wrong direction of battery polarities may
cause the battery liquid leakage or the burst
of them.
• When the battery replacement alarm
melody is generated, use all new batteries
instead of the existing batteries.
• According to the wireless communication
environment, its battery may consume
much.
•
Interference in wireless communication
may occur when this product is used, or
radio interference may occur from other
devices
.
• As this radio system may have radio
interference during the operation, it cannot
provide a service for human lives.
• Too much dew condensation may affect the
performance of this product.
• Keep 20 cm or longer away from this
product when using it.
RF Key Tag : 2EA
●
●
●
Exterior Unit
Interior Unit
User Manual
‘AA’ Batteries (LR6)
●
Handle Shaft Spring
●
Handle Shaft, Installation Screws
●
Installation Manual
Dust Box
Strike Plate
Mortise
The product components may vary depending on the installation
environment.
Product Components
Entry Complete/
Silent Mode Touch Button
[ CLOSE / DOUBLE LOCK ]
Button
Interior Unit Handle
Dead Bolt
Latch Bolt
Battery Cover
[ Registration ]
Button
1.5V AA Batteries
Reset Button
Key Tag Reader
Number Pad
Away Mode Touch Button
Battery Replacement Alert
LED
External Power
Exterior Unit Handle
※
Silent Mode
Before entering the PIN code, press the [
] button and enter the PIN code, then both
the sound of the key entering and the door opening will be muted.
It is a useful function if you do not want to disturb neighbors when you go in and
out at night.
1. Randomizer Mode
2. Common Mode
When the number pad lights up, enter the
PIN code and press the [
] button.
Opening the Door from Outside (PIN code)
When purchased, the product is set to Multi-leveled Security Code Entry Mode
initially. Please, refer to ‘Multi-leveled Security Code Entry Mode setting’ for
Common Mode setting.
●
PIN code must be entered after the light is on, and if does not, touch [Number Pad]
and re-enter.
●
To cancel, press [ ] button and re-enter.
●
If the PIN code is wrong 5 times, “peep” warning alarm will sound 20 times and
the system will shut-down for about 3 minutes. When malfunction happens,
“beep” will sound every 10 seconds, and stop mode will be turned
off automatically after 3 minutes with multiple ‘beeps’.
Note
Touching [Number
Pad] will light up
the number pad.
Touching [ Number Pad ]
will light up the number pad.
When two arbitrary
buttons are lighted,
press the buttons
in order.
When the numbers on the
number pad are lighted, enter
the PIN code and press the
[
] button.
Success:
Be be be beep
↑
Success:
Fail:
DING DONG DING DONG
BE BE BE BEEP
↑
Success:
Fail:
DING DONG DING DONG
BE BE BE BEEP
↑
Fail:
Ding dong ding dong
Exterior Unit Parts
Interior Unit Parts
Mortise
Place the key tag on the key tag sensor.
The door will be opened after 1 second.
A locked door can be opened from outside by using a key tag.
Place the registered key tag on the key tag sensor.
Opening the Door from Outside (Key Tag)
●
Note
When the key tag sensor does not recognize the key tag, touch
the number pad and put the key tag on the key tag sensor to
open the door.
Opening the Door from the Inside
Automatic Locking Setting
Manual Locking Setting
Automatic Locking Setting
Manual Locking Setting
The door is automatically locked 2 seconds after the
door is closed.
The door is locked when the
[ CLOSE / DOUBLE LOCK ] button
from the inside is pressed.
Locking the Door from the Inside
The door is automatically locked 2 seconds after the
door is closed.
Locking the Door from Outside
All registration and setting are activated only when the door is opened.
Initialization (PIN code , Key Tag)
2. Enter the Numbers for Initialization
All registered data (PIN code , Key tag) are deleted.
After initialization, the PIN code is set to ‘1234’, and the registered key tag
data are erased. Please register a new PIN code after initialization.
When the number pad is lighted, enter
‘4560852580’ and then press the
[
] button.
DING DONG
→
DING DING
Success:
DING DONG DENG
Fail:
DING DONG DING DONG
DING DONG
DING DONG DENG
DING DONG DENG
A user can register a PIN code (4 to 12 digits), and only one PIN code canbe
registered, The default PIN code is “1234.”
Change the PIN code
●
To prevent an intrusion, it is recommended to make a PIN code with 6 or
more digits. (Each digit number ranges from 0 to 9.)
●
Manage your master PIN code with care so that unauthorized people will not
have access to it. Regularly changing your PIN code can reduce the risk of it
being leaked.
●
A registered PIN code cannot be deleted. Register a new PIN code .
●
To make sure the PIN code has been properly registered, check the new
PIN code and close the door.
●
If checking the new PIN code fails, initialize the key information (see page 5)
to initialize the PIN code, and change the PIN code again.
Warning
Enter the new PIN code (4 to 12 digits)
and press the [
] button.
1. Press [Register] Button
DING DONG
1. Press [Register] Button
1. Press [Register] Button
2. Enter a New PIN code
During registration, already registered key tags will be deleted.
Please register all key tags at once.
Up to 20 key tags can be registered. (Only ISO14443 A Type is available.)
2. Place the Key Tag Reader
DING DONG DENG
Place the key tag to be registered
on the key tag reader of the outer body.
You will know the key tag has been
registered when “DING DONG DENG”
sounds.
If you want to end this process,
press the [Register] button
of the inner body shortly.
●
To register multiple key tags, lightly place another key tag to
the Key tag reader within 20 seconds after registering the previous key tag.
●
Only the key tags provided by Samsung SDS can be used.
●
Samsung SDS will not take responsibilities for any problem that may
occur because you used an authentication means other than the
key tags that we provided.
Warning
Open the battery cover of the inner body
and press the [Register] button shortly.
Open the battery cover of the inner body
and press the [Register] button shortly.
Open the battery cover of the
inner body and press the [Register]
button for 3 seconds.