[14]
wAppLoxx Pro
–
installation instructions and user guide
Installing the basket
During installation, make sure that the mounting plate (4)
between the basket (3.2) and the shaft with the motor
(3.3) is inserted in the correct order.
When the cylinder body has been installed in the lock,
secure the basket (3.2) to the shaft with the motor (3.3)
using 6 screws.
In order to ensure that the cylinder is tight, it must be
ensured that sufficient screw glue is applied to the
electronic screws.
Installing the PCB holder
Place the PCB holder (3.1) in the basket and secure using
two small electronic screws.
When inserting the holder, ensure that the EMC contact
is not bent (see figure on the left).