(P/N) 747.1210 Rev A 01/11 © copyright 2006-2011
Kaba Mas LLC
Page 1 of 2
OPERATING AND CHANGING INSTRUCTIONS
KEYLOCK
2270 KEY LOCK
Lock Operations
Open Lock
1. Insert the Setup Key (or current Operating Key) into the lock, through the
keyhole Escutcheon Cover (P/N 2226) or Escutcheon Plate (P/N 2219) on the
front of the safe door (Figure 1).
CautiOn: Never force the key into the lock. This could cause permanent
damage to the Lock or the Key. Once the Key is inserted, do not apply
inward or outward axial force to the Key. This could prevent the Lock from
opening correctly.
2. Turn the Key to the RIGHT (CW) until it stops, and the bolt is retracted.
nOte: The Key cannot be removed while the bolt is retracted.
3. Open the safe door.
Close Lock
1. Close the safe door.
2. Turn the Key to the LEFT (CCW) until it stops.
3.
Remove
the
Key.
Set or Change Operating Key
The 2270 Keylock is shipped from LA GARD set to open with a factory Setup Key. The
Lock installation should be completed prior to setting the Lock to open with an Operating
Key. Refer to 2270 Keylock Installation Instructions (748.1210).
Escutcheon Index
Key Index
Figure 1
