33
s) Display servos
This feature shows you in real time the position of all four servo
arms. Using the "Test" button to investigating whether the
mechanism in the model is working properly. Therefor the servo
arms moved slowly between its end points back and forth.
t) Race timer
This feature allows the measurement of time in four
different modes. Tap on the "Mode" to switch between the four
different modes. The following modes are at your disposal:
„Up timer“:
This mode starts the timer and terminated them after
touching the "Stop" button.
Tap the "Start" button to start the timer. Then tap the "Stop" button to
stop the timer. To set the counter back to "0", tap the "Reset" button.
„Down timer“:
This mode allows you to individually set a countdown time.
Move the controller to the left or right to set a specific time.
The adjustable time intervals can be adjusted by one minute.
Tap the "Start" button to start the timer. Then tap the "Stop" button
to stop the timer. To set the counter back to "0", tap the "Reset" button.
Picture 30
Picture 31
