manualshive.com logo in svg

Absima CR4T Ultimate, User Manual, Page: 38 / 42

Share
Download
Absima CR4T Ultimate User Manual Download Page 38

38

x) System

This menu allows different settings for your product.

 

 

 

 

„Backlight timeout“:

You can set the duration of the backlight of the LCD when it is 

not touched.

 

 

 

 

 

  

   

 

„Backlight“:

This adjusts the brightness of the backlight for the LCD display. 

A higher value makes for better recognition on the LCD screen, 

and also for a rapid discharge of the battery.

 

 

 

 

   

 

 

   

 

 

„Sound“:

Here you can activate or deactivate the speaker or the product.

                I  If you deactivate the speaker, the product will give no 

                   warning signals, if the battery voltage is to low. 

 

 

 

 

 

. 

     

 

 

 

 

 

 

„Auto power off“:

If the product is not about five minutes in use, an acoustic signal sounds. After another five minutes, the product will 

shut down automatically. Put a check mark here to activate this feature.

     

 

   

 

 

   

 

 

 

„Screen calibrate“:

You can calibrate the screen display on the LCD screen. 

 

 

 

„USB function“:

"ABS-iT 4 emulator" means that the product is connected to a PC and can be operated on this.

 

   

 

 

 

   

 

 

 

 

 

„Language“:

Here you can change the menu language of the product. The options are english, french and german

 

     

   

„Firmware update“:

You can arrange a firmware update. Therefor connect the product to a PC available via a Micro USB cable. 

During the firmware update never remove the battery or the Micro USB cable. The product will lose its 

functionality and can be rendered unusable.

 

     

 

 

     

   

 

 

„Factory reset“:

Here you can put the product back to the factory settings. All previous settings will be deleted.

 

     

 

 

„About ABS-iT4“:

This shows you the product to the latest firmware version.

 

 

Picture 35

Summary of Contents for CR4T Ultimate











































Reviews:

No comments