Abloy DA461, Installation And Commissioning Manual, Page: 13 / 32

13
M
Y
Min 14
Max 20
L 585
DA104
44 ° -55 °
Frame
depth
Pre-setting of the spring force
Y
34
Frame depth
- After installation, ensure that the arm and door are properly
adjusted.
- Mount a door stop to the door open position so that wind
will not drive the door against the wall, resulting in damage.
- Tighten the holding screw.
7.4 Assembly of the operator and sliding arm DA149 to the opening side
1. Mount the arm to the operator
2. Teach door open position 44°-55° (see page 18)
3. Remove the arm
4. Turn mode switch to OPEN
5. Close the door and mount the arm to the operator and
to the sliding rail
6. Teach door closed and open positions again
Frame
depth
Arm distance
L /mm
Minimum door
width M /mm
< 100 90 700
100-200 170 800
Y Length of
extension piece
Mounting
of the arm
44 No extension piece M8x20 +
washer
54 10 mm (DA150/01) M8x30 +
washer
64 20 mm (DA150/02) M8x35 +
washer
Mounting of the operator: M6x14 and washer