Abit KG7, User Manual

Page: 56 / 104

Chapter 3
KG7-Lite/KG7/KG7-RAID
3-28
Resume by Alarm:
Two items are available: Disabled or Enabled. The default setting is Disabled. When Enabled, you can set
the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode.
"
Date (of Month) Alarm/ Time (hh:mm:ss) Alarm:
You can set the Date (of month) Alarm and Time (hh:mm:ss) Alarm, any event occurring will awaken
a system that has powered down.
Reload Global Timer Events:
When one of the specified events occurs, the count down for entry into the power saving mode goes back
to zero. Since the computer will enter a power saving mode only after a specified inactivity delay (time
specific for Doze, Standby and Suspend modes) and after there has been no activity during this time
period, any event will cause the computer to re-count the time elapsed. Resume events are operations or
signals that cause the computer to resume time counting.
IRQ Wakeup Events:
The following is a list of IRQ’s,
I
nterrupt
R
e
Q
uests. When an I/O device wants to gain the attention of
the operating system, it causes an IRQ to occur. When the operating system is ready to respond to the
request, it interrupts itself and performs the service.
Figure 3-7B. IRQ Wakeup Events Setup Menu
As above, the choices are Enabled or Disabled.
When set to Disabled , activity will neither prevent the system from going into a power management mode
nor awaken it. Each item has two options: Enabled
)
Disabled.
!
IRQ3 (COM 2): The default setting is Enabled .
!
IRQ4 (COM 1): The default setting is Enabled .
!
IRQ5 (LPT 2): The default setting is Enabled.
!
IRQ6 (Floppy Disk): The default setting is Enabled .
!
IRQ7 (LPT 1): The default setting is Enabled .