Abit AH6, User Manual

Page: 19 / 84

Installing the Mainboard 2-13
¯
Installation of the Pentium

II CPU
1.
Mount the two black plastic pegs onto the mainboard. These pegs will
be used to attach the fan heat sink supports. Notice that one hole and
the base of one peg are larger than the other hole and peg base. Push
each peg into its hole firmly to the end until you hear it “ click ” into
place.
2.
Slide a black plastic support onto each end of the fan heat sink , making
sure that the hole and clip are on the outside edge of the support . Slide
each support toward the center of the processor until the support is
seated in the outside groove in the fan housing .
Retention
mechanism
Large peg and hold
Top of processor
Groove in fan housing