56
LOOP:
During exercise, press MODE to check LOOP count in DISTANCE window.
Each LAP indicates 0.4KM / 0.25MILE
The display range is from 0 to 99 (loops).
Screen Saver:
During static and STOP status, screen saver automatically starts when there's no
signal input in 200 seconds or during exercise, press mode button to enter screen
saver mode.
Backlight function:
The backlights automatically light up after electricity. In the stop mode, it turns into
screen saver automatically after 200 seconds if no further operating message from
monitor. The backlights automatically turn off after 1 hour if no further operating
message from monitor.
Optional function description
There are several functions which are optional, were set as default and not
changeable during manufacturing of this machine. The user manual is universal
therefore it has description of all standard and optional functions. If a machine
doesn't have certain optional functions, it means it was set during manufacturing and
can not be altered or added.
Back light function
2. RECEIVER BUILT IN
3. Heart Rate Control program (HRC)
OPERATION INSTRUCTIONS
TO START:
Turn on power switch and attach POWER KEY to the monitor. All the windows will
fully display for one second; the program will start from manual function. Press
START/STOP button to begin exercise. Please notice that the machine does not
work without the POWER KEY attached.
TO STOP:
Press START/STOP button, remove POWER KEY or turn off power switch.
CAUTION:
Clip the other end of the power key to your clothing before exercise to ensure the
machine will stop in case the user accidentally runs off the track. Should that
happens, the power key will fall off from the monitor and the Treadmill will stop
immediately to avoid further injury.
QUICK START --
Press mode buttons, then press SPEED
▲
or SPEED
▼
buttons to select main
functions from MANUAL, SPEED PROGRAM, INCLINE PROGRAM, USER
PROGRAM, H.R.C and BOFY FAT, press ENTER to confirm.
Press START/STOP to begin exercise.
Summary of Contents for Trex 12 JBM-5255
