54
the button is pressed, please hold the heart rate detector appropriately, the test
will last for 60~90 seconds and the result will show on the screen. If you want to quit
pulse recovery function during the test, press any button again to exit.
Press pulse RECOVERY button to start. To measure user's heart rate, put your
hands on the hand pulse pads and machine will stop at the same time. After 60 ~ 90
seconds, DISTANCE window show the highest heart rate pulse, CALORIES window
show the lowest heart rate pulse, and SPEED window show the value of heart rate
recovery from F1.0 (the best heart rate recovery) to F6.0 (the worst heart rate
recovery).
PROGRAM AND MANUAL PROFILE DISPLAY:
Under this mode, you can choose MANUAL, PROGRAM, USER, H.R.C, or BODY
FAT program you desired.
Main Windows:
The main window will shows the program profile devised into 20 segments.
Under the PROGRAM or USER mode, the segment will shift to next every 30
seconds if you did not set the exercised time. During the exercised time that was set,
it divided by 20 segment.
No matter how set or unset the time at MANUAL or H.R.C., the chart will shift to next
by 30 seconds.
TIME Display:
Shows the exercise time.
Count up: Without setting the value, time will count up after pressing START/STOP
button and the maximum value is 99:59.
Count down: In the setting mode, press SPEED
▲
or SPEED
▼
button to set up
exercise time. The range of setting value is from 10:00 to 99:00 with each increment
or decrement of 1:00.
After finish setting the value, the monitor will start to count
down. While counting down to 0:00, monitor beeps to remind you the target is
achieved, and stop counting at the same time.
DISTANCE Display:
Shows the distance.
Count up: Without setting value, the distance will count up and the maximum value is
999KM.
Count down: In the setting mode, press SPEED
▲
or SPEED
▼
button to set up
exercise distance, range of setting value is from 0.1KM to 999KM. The range of
setting value is from 0KM to
10KM with each increment or decrement of 0.1KM.
The range of setting value is from
10KM to 999KM with each increment or
decrement of 1.0KM. After finish setting the value, the monitor will start to count
down. While counting down to 0.0, monitor beeps to remind you the target is
achieved, and stop counting at the same time.
CALORIES Display:
Shows the calories consumed.
Count up: Without setting value, the calorie will count up and the maximum value is
999 Kcal.
Count down: In the setting mode, press SPEED
▲
or SPEED
▼
button to set up
calories to be burned. The range of setting value is from 1.0 Kcal to 999 Kcal with
Summary of Contents for Trex 12 JBM-5255
