Abilia Control Medi Standard, Manual

Page: 44 / 52

4. Button Labelling
The buttons on your Control Medi are marked with numbers as
standard. The numbered label can be replaced with a personalised
design. It is possible to create your own button labels using pre-
designed templates with symbols and text, refer to www.abilia.com .
The document can also be downloaded. The labeling is printed on a
clear sheet or white paper and inserted through the slit on your
Control Medi. Before the button label is inserted, the keyguard must
be removed.
Remove the keyguard by gripping the middle, and then lifting it
straight up, see photo.
An A4 sheet for making notes is included with your Control Medi.
5. Control Medi Holders
Rubber feet are mounted on the underside so that your
Control Medi can lie still on flat surfaces. Your Control
Medi can also be equipped with a clip (accessory) which
can be attached to a belt or pocket.
As an optional accessory, there is also a holder that fits to
your Control Medi. This holder can be assembled for
mounting on to a table or attaching to a pipe. The holder
can also be mounted on a mobile stand.
Another option is to hang your Control Medi around the neck. A neck strap
is supplied with your Control Medi.
Do as follows to attach the neck strap:
1.
Unscrew the battery lid.
2.
Place the thin loop of the neck strap in the groove around the screw
mount.
3.
Screw the battery lid back down.
4.
Adjust the length of the neck strap.
WARNING: The string lock is a safety feature to prevent strangling.
Make sure that the ends of the neck strap can be pulled out eg. if the
transmitter gets caught on something. Never make knots in the neck strap
Label
Keyguard