Abilia Control Medi Standard, Manual

Page: 40 / 52

3.11 Setting an acceptance delay
An acceptance delay can be set for pressing the buttons. Acceptance delay is the time a button has
to be pressed for before a function is activated. An acceptance delay can be set from 1 to 4. 1 is no
delay at all (off) and 4 is the maximum delay (1 sec.).
1.
First press
---
and then simultaneously press
2
or 2 seconds. When you release the buttons the
“Setting” alert sounds and the indication lamp on button 2 flashes.
2.
Press
2
.
3.
Press your desired value for the acceptance delay,
1
is off, and
4
is max.
4.
If the action is successful, the “Success” alert sounds. If something goes wrong or takes too long,
the “Error” alert sounds.
Setting an acceptance delay
Press
---
+
2
2 sec ,
2
, then choose the setting.
1
= 0 sec,
2
= 0.3 sec,
3
= 0.6 sec,
4
=1 sec
Default setting: Acceptance delay = OFF (0 sec)
3.12 Repeating the last function
Your Control Medi Standard can have a button that repeats the last sent function.
Do as follows to add Repeat Last Function to a selected button:
1.
First press
---
and then simultaneously press
2
for 2 seconds. When you release the buttons
the “Setting” alert sounds and the indication lamp on button 2 flashes.
2.
Press
5
.
3.
Press
---
to choose the level.
4.
Press the desired button
X
on the selected level.
5.
If the action is successful, the “Success” alert sounds. If something goes wrong or takes too long,
the “Error” alert sounds.
To delete the Repeat Last Function, you will need to reset the button. See
Reset to default settings,
reset a button.
Repeating the last function
Press
--- + 2
2 sec
, 5 ,
choose the level and button
X .
Default setting: OFF (none)