Abilia Control Medi Standard, Manual

Page: 30 / 52

1.3 General information about Control Medi
To be able to use your Control Medi there are certain things that you should know:
WARNING: Make sure that the user always can get help through a backup system if the product
does not operate correctly.
WARNING:
Before you use the product, make sure that all connected appliances and electronic
equipment are correctly installed, used as intended and safe to use.
•
The Control Medi is delivered preset with GewaLink channels, meaning that it is possible to use
the transmitter immediately after the batteries has been inserted. See section
Inserting
Batteries
.
•
To enter the programming mode, press first the Level button and then simultaneously one of
the Function buttons for 2 seconds. Different Function buttons are chosen depending on what is
to be programmed.
•
If you press the wrong button or make a mistake when programming you can always press the
Level
button for two seconds. It works as a
Reset
button.
•
It is important not to wait too long between the different steps when programming. After a
certain time your Control Medi automatically leaves the programming mode to save power.
•
If a button on your Control Medi or control switch is pressed for more than 1 minute, your
Control Medi will stop transmitting to save power.
•
The settings can be protected by using the Settings Lock.
•
You can only change the settings of levels that are unlocked.
This picture shows the various terms and functions which are described in the text.
Function button
s -
Code
button
Indication lights
Level
button /
Function
button
Indication lights indicating
different levels, level 1-4
Fig 1