3.6 Recording IR Channels from another Transmitter
Make sure the batteries in both transmitters are fully charged. Do not use the transmitters in intense
light (e.g., sunlight) when programming.
Place the two transmitters on a table with the original transmitter directed towards the rear of your
Control Medi, see picture.
1.
First
---
and then simultaneously press
1
for 2 seconds. When you
release the buttons the “Setting” alert sounds and the indication lamp
on button 1 flashes.
2.
Press
1
.
3.
Choose the level where the channels are to be recorded with
---
.
4.
Press the button
X
where the channel is to be recorded. The indicator
light for the selected button glows steadily and the “Press” alert
sounds.
5.
Press and hold the corresponding button
Y
on the original transmitter
pressed. Release the button when the indicator light for the selected
button goes off and the “Release” alert sounds. This may take up to 10
seconds. If the indicator light glows again and the “Press” alert sounds,
you should press the button one or more times until the “Success” alert
sounds.
If the “Error” alert sounds, the recording has failed. Try again from step
4.
6.
If the recording of the first button was successful, repeat steps 4 and 5
until all buttons are programmed.
7.
Finish by pressing
---
for 2 seconds.
8.
If the action is successful, the “Success” alert sounds. If something
goes wrong or takes too long, the “Error” alert sounds.
9.
Now test your recorded functions on the device that is to be controlled.
Recording IR Channels
Press
---
+
1
2 sec
,
1
,
choose the level with
---
, select button
X
, select button
Y
,
then continue or finish with
---
2 sec
Important
! When just
one level
is used, the
Level
button automatically becomes the next levels first
button, see
Table 1
. It means that it is possible to record an IR channel on the
Level
button, but only
when just one level is being used.
Original transmitter
Summary of Contents for Control Medi Standard
