Abicor Binzel BRS-LCi, Operating Instructions Manual

Page: 20 / 76

EN - 2
English Translation of the original operating instructions BRS-LCi
EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
Operation Instructions which may become necessary due to misprints, inaccuracies or improvements to the product. Such
changes will however be incorporated into subsequent editions of the Instructions. All trademarks mentioned in the operating
instructions are the property of their respective owners.
1 Identification
EN-3
1.1 EU Declaration of Conformity EN-3
1.2 Responsibilities of the User EN-3
2 Product Description
EN-3
2.1 Designated Use EN-3
2.2 Use contrary to the designated use EN-3
2.3 Technical Data EN-4
2.4 Abbreviations EN-5
2.5 Nameplate EN-5
3 Safety Instructions
EN-6
3.1 Classification EN-6
3.2 Emergency information EN-6
3.3 Safety symbols labelling EN-6
4 Scope of delivery
EN-7
4.1 Transport EN-7
4.2 Storage EN-7
5 Functional Description
EN-7
5.1 Cleaning station sub-assembly EN-8
6 Putting into operation
EN-8
6.1 Installing with support EN-9
6.2 Installing without support EN-9
6.3 Fastening the V-block EN-9
6.4 Mounting the milling cutter EN-10
6.5 Setting up the clamping position EN-10
6.6 Setting up the compressed-air motor EN-11
6.7 Adjusting the proximity switch EN-11
6.8 Adjusting the injection unit quantity EN-12
6.9 Establishing the electrical connection EN-13
6.9.1 Connection side HAN 16A EN-13
6.9.2 Terminal strip X1 EN-14
6.10 Flow chart EN-15
6.11 Connecting the pneumatic system EN-16
7 Operation
EN-16
8 Putting out of operation
EN-16
9 Maintenance and cleaning
EN-17
9.1 Weekly cleaning EN-17
9.2 Monthly cleaning EN-17
10 Troubleshooting
EN-17
11 Dismounting
EN-18
12 Disposal
EN-18
12.1 Materials EN-18
12.2 Consumables EN-19
12.3 Packaging EN-19