ABEM Terrameter SAS 1000 / SAS 4000
- 87 -
3102 One of n
x-move
or n
y-move
must be zero. The layout can only be moved
in either the X- or Y-direction.
3201 Could not open a .MM file
3202 Could not find the referred geometry file .XYZ
3203 Too few arguments to the command on the Multimac protocol file
3204 Too many arguments to the command on the Multimac protocol file
3205 At least one value in the parsed command was out of limits
4001 Syntax error, invalid command.
4011 Syntax error in command. Four numerical values are required.
4012 One or more of the values have a duplicate in this command.
4013 The electrode numbers were defined in an incorrect order in the
context of the selected electrode configuration.
4014 In four-electrode configurations there should never be a ”zero”
electrode.
4015 Unexpected electrode(s).
4051 Too many entries in the protocol file.
4101 Could not interpret the contents of the '.ADR' file. Further
processing not possible.
9011 Could not find/open the Electrode Layout Code File.
9012 The Electrode Layout Code File did not contain any valid code
definitions.
