ABEM Terrameter SAS 1000 / SAS 4000
- 1 -
1
INTRODUCTION
This Instruction Manual covers operation, maintenance and, where appropriate, reduction of
data. A careful study of this manual is recommended before starting to work with the
equipment.
ABEM products are carefully checked at all stages of production and are thoroughly tested
before leaving our factory. They should provide many years of satisfactory service if handled
and maintained according to the instructions given in this manual.
ABEM will be pleased to receive occasional reports from you concerning your use of and
experience with the equipment. We also welcome your comments on the contents and
usefulness of this manual. In all communication with ABEM be sure to include the instrument
types and serial numbers. Contact details:
Address:
ABEM Instrument AB,
Löfströms Allé 6a 1, S-172 66 Sundbyberg, Sweden
.
Phone number:
+46 8 557 613 00
E-mail:
or, if you have technical questions,
s
.
Information about ABEM:s product range is available on internet:
http://www.guidelinegeo.com
. Also the most recent version of interpretation software are
available on:
www.guidelinegeo.com
.
In general, e-mail correspondence gives the fastest response.
In view of our policy of progressive development, we reserve the right to alter specifications
without prior notice.
IMPORTANT
It is important that you as a user of the instrument notify ABEM about your name and
address. This allows us to keep you updated with important information about the instrument
and e.g. upgrades of the built-in software and documentation. Please send your name and
address directly to ABEM, utilize the Warranty Registration Card delivered along with the
instrument.
1.1
UNPACKING AND INSPECTING
Use great care when unpacking the instrument. Check the contents of the box or crate against
the packing list that is included. Inspect the instrument and accessories for loose connections
and inspect the instrument case for any damage that may have occurred due to rough handling
during shipment.
1.1.1
Shipping damage claims
File any claim for shipping damage with the carrier immediately after discovery of the
damage and before the equipment is put into use. Forward a full report to ABEM, making
certain to include the ABEM delivery number, instrument type(s) and serial number(s).
All packing materials should be carefully preserved for future re-shipment, should this
become necessary.
1.2
WARRANTY
ABEM warrants each instrument manufactured by them to be free from defects in material
and workmanship. ABEM's liability under this warranty is limited in accordance with the
terms of General Conditions for the Supply of Mechanical, Electrical and Associated
