16
3.11 Restore Factory Defaults:
Unplug the appliance for not less than 5 seconds then plug in to restore the factory defaults.
3.12 Using the Remote Control:
A remote control is included with this fireplace.
Before using it for the first time, you must remove the protective film from
the battery compartment to make contact.
A button cell battery (CR2025 3V) is already inserted.
To use the remote control, the switch A of the unit must be set to the ON
position.
All buttons on the remote control are to be used exactly the same as those
on the control panel.
To use the remote control effectively, hold it directly towards the electric
fireplace at a distance of approx. 0.5 - max. 8 metres.