12
3
Operating Instructions
3.1
Set time
The clock in the front of the electric fireplace is battery-operated.
To put the clock into operation, a 1xAA 1.5V battery must be inserted via the back of
the fireplace (not included).
Then you can set the current time by turning the crown either clockwise or
anticlockwise.
3.2
Master Power Switch (A):
Open the cover at the bottom of the heater. It is a magnetic lock.
To the right of the display is the main switch. This switch activates or
deactivates the electric fireplace (I = activated / 0 = deactivated).
The functions explained below only work when the main switch is on.
3.3
ON/OFF (B):
Press button B (ON/OFF) to begin the flame effect. It displays as
following:
•
The heating symbol appears and the heater starts to heat when
the room temperature is below 10°C. If the room temperature is
above 10°C, the symbol will not appear and the heater will not start
heating.
•
The clock symbol will light up because no time has been set yet.
To do this, follow the explanation on "Setting the time" under 3.5
Mode selection.
Two short beeps that increase in pitch sound when switched on and three beeps that decrease in pitch sound when
switched off. When switches on, the heating level, set temperature and clock icon are displayed. The display will be
disappeared after 60 second without any operation. Press any button to display again.
A
B
C
D
E
F