14
3.9
Timer function:
At default interface, keep pressing button D to
select the regular timer, it’s
displayed “HOUR” and flashing timer icon as following:
Press button C to start the timer setting. Press button E or F to set the
desired time. You can select the following time sequences: 30min, 1H, 2H,
3H, 4H, 5H, 6H, 7H, 8H and 9H.
The default setting is 00 min and is displayed as follows:
3.10 Mode Selection (Secondary Menu):
At default interface, keep pressing button D
to select Mode Selection, it’s
displayed “MODE” as following:
Press button C to access Mode menu. Press button E or F to select the desired mode.
1) Open Window Detection Mode:
Keep pressing button D to select Mode menu. Press button C to validate,
then E or F to access Open Window Detection Mode. The screen show
“OPEN” as following:
Press button C to validate, then button E or F to select ON or OFF. Press
button C to turn on or turn off the Open Window Detection Mode.
After activate the Open Window Detection, the appliance will automatically shut off the heating when it detects the
room temperature decreased more than 4°C in 10 minutes and maintain the decreased temperature not less than
20 minutes. To restart the heating, adjust the set temperature then press button C to validate the setting. The Open
Window Detection Mode will be OFF after reset the temperature.
2) Time Setting:
Keep pressing button D to select Mode menu.
Press button C
to validate, then button E or F to access Time Setting. It’s
displayed “TIME” as following
Press button C to validate, then button E or F to select day, D1 for Monday,
D2 for Tuesday, D3 for Wednesday, D4 for Thursday, D5 for Friday, D6 for
Saturday and D7 for Sunday.
Press button C to validate the day, then button E or F to set time (hour).
Press button C to validate the hour, then button E or F to set time (minute).
Press button C to validate the time setting. To exit the setting during operation, press button D.
If clock icon permanently flashes, this indicates that the time is offset following a power cut. It’s flashing as
a time has not been set.
3)
Manual Setting for Weekly Programming:
Before setting this program, select program “ProG”.
