![background image](http://html1.mh-extra.com/html/abbott/freestyle-navigator-ii/freestyle-navigator-ii_user-manual_450953006.webp)
7
8
--- ---, ---
TIME / DATE
09 : 28
--- ---, ---
Accept
CURRENT DATE
Month =
--
Day = --
Year = --
Accept
Push scroll wheel
to select “Month”
Scroll up or down
to select month
Push scroll wheel to
confirm and repeat
for “Day” and “Year”
CURRENT DATE
Month = Jun
Day = 06
Year = 2012
Accept
Note:
It is very important that the time and date are correctly set. The
accuracy of the graphs and statistical reports depends upon the date
and time being correct.
Initial Setup
Charging the Receiver
Before using your FreeStyle Navigator II System for the first time, you
MUST fully charge the Receiver’s battery for at least 6 hours . Do not
disconnect the Charging Cable from your Receiver until it is fully
charged .
= fully charged
= not fully charged
= completely depleted
CAUTION: Do NOT check your blood glucose while charging your
Receiver .
Connect one end of your Charging Cable to an
electrical outlet with the A/C Wall Charger
or to a powered USB Port, such as on a
computer . Connect the other end
of the Charging Cable to your
Receiver . To fully charge the
battery, charge the Receiver for
at least 6 hours .
A fully charged Receiver battery
typically lasts approximately 3 days .
Battery life may be shortened if you activate the display frequently . The
number of alarms you receive may also shorten battery life .
Upon disconnecting from the Charging Cable, the Receiver completes
a sequence of self-checks . If the display is turned on, the Receiver emits
tones, vibrates and flashes screen checks during this time . If the Receiver
Charging Cable, Receiver,
and A/C Wall Charger
can detect that any portion of the self-test fails, the Receiver displays a
message on the screen to contact Customer Care .
Setting Time and Date
To turn the Receiver On, press the Power button
.
Accept
--- : --- ---
--- ---, ---
TIME / DATE
Accept
Push scroll wheel
to set time
CURRENT TIME
Hour =
--
Minute = --
Accept
Push scroll wheel
to select “Hour”
Scroll up or down
to select hour
CURRENT TIME
Hour =
09
Minute = --
Accept
Push scroll wheel to confirm
and repeat for “Minute”
CURRENT TIME
Hour =
09
Minute =
28
Accept
Setting Time and Date Format
If you need to change your time and date format settings, follow the
instructions below:
Menu
➞
Settings
➞
Time & Date
➞
Format
320
180
40
16:12
12 May 2012
Graph
Menu
Insert
and
Connect
to a new
Sensor
MAIN MENU
Add Event
Manual Cal
Settings
Status
Home
Select
SETTINGS
Time & Date
Self Test
Glucose Targets
Display
Home
Select
TIME & DATE
16:14
18 May 2012
Format
Done
FORMAT
Time = 24 Hour
Date = Day / Month
Accept
ART22683-101_rev-B.indd 7-8
1/7/15 11:43 AM