manualshive.com logo in svg

ABB VBF 36, Instruction For Installation, Service And Maintenance

Introducing the ABB VBF 36 - a cutting-edge product designed to revolutionize your space. With its advanced features and high performance, this versatile device offers endless possibilities. Ensure smooth integration with our comprehensive Instruction for Installation, Service and Maintenance manual. Download it for free at manualshive.com to unlock its full potential.

Share
Download
background image

12

General

1.0 Technical details

This operating instruction is applicable for Outdoor circuit Breaker type VBF.

1.1  Type designation                                                                              VBF            36            16             25

Outdoor Vacuum Circuit Breaker

Type VBF

Rated voltage – 

Rated normal current -

Rated breaking capacity – 26.3kA

24 for 24kV
36 for 36kV

12 for 1250 Amp
16 for 1600 Amp

1.2 Specifications

1.3 Rating plate

Type                                                             VBF 36

Standard                                                      IEC – 62271-100

Rated voltage                                              36kV

Frequency                                                   50 Hz

Insulation level                                            70/170kVp.

Normal current                                            1250 / 1600 Amps.

Short circuit breaking current                      26.3 kA

Operating sequence                                    0-0.3S-CO-3 Min.-CO

Weight                                                         800 kg.

PART B  Installation, Operation & Maintenance

Summary of Contents for VBF 36





























































Reviews:

No comments

Related manuals for VBF 36

IFM DF21 Series Installation Instructions Manual preview
DF21 Series
Brand: IFM Pages: 8
ensto NX2006818 Installation Manual preview
NX2006818
Brand: ensto Pages: 101
ABB SACE Emax 2 E4.2 Instruction Handbook Manual preview
SACE Emax 2 E4.2
Brand: ABB Pages: 72
GE Energy THQLLX8DR Installation Instructions preview
THQLLX8DR
Brand: GE Energy Pages: 2
NAW Controls Eureka AN Series Manual preview
Eureka AN Series
Brand: NAW Controls Pages: 27
Westinghouse Porcel-line 150 DHP 1000 Instructions Manual preview
Porcel-line 150 DHP 1000
Brand: Westinghouse Pages: 78
ABB 15VHK500 Installation And Maintenance Instructions Manual preview
15VHK500
Brand: ABB Pages: 14
NATIONAL SWITCHGEAR Westinghouse DB-100 Manual preview
Westinghouse DB-100
Brand: NATIONAL SWITCHGEAR Pages: 42
GE MicroVersaTrip AKR-75 Maintenance Manual preview
MicroVersaTrip AKR-75
Brand: GE Pages: 102
ABB SACE Emax Series Installation, Service And Maintenance Instructions preview
SACE Emax Series
Brand: ABB Pages: 161

Brands by name

Popular brands

Load more brands