ABB UMC100-FBP, Technical Description

Page: 10 / 158

- 10 - UMC100-FBP
Universal Motor Controller
UMC100-FBP
Technical Description
V 6
FieldBusPlug / Issue: 03.2012
Metering, Monitoring and Diagnosis
•
Rapid, comprehensive diagnostics and operating status information is available on the UMC100 itself
(LEDs), on the LCD panel (clear text messages), via fieldbus or on a laptop connected directly or via bus
to the UMC.
•
The fully graphic, multi-language LCD panel allows configuration, control and monitoring of the UMC
and its inputs and outputs.
•
Available diagnosis includes motor, bus and device status, maintenance counters such as number of
starts and overload releases, remaining cooling time, etc.
Function Block Programming
•
The UMC100 has a set of predefined applications built in. These applications are built on the basis of
function blocks and can be used directly without the need for a programming tool.
•
Custom applications can be created in a convenient way. The custom application editor is integrated in
the PBDTM.
•
You can monitor an application online to support you during development and testing.
•
Control and protection related and general purpose function blocks are available: boolean logic, timers,
counters, blocks representing the hardware, starter functions, ...
•
There are basic function blocks like boolean blocks that have no parameters. But there are also very
powerful function blocks such as the multifunction inputs or the starter blocks. Such blocks have pa-
rameters accessible via LCD and fieldbus. By setting the block parameters you can adjust the behaviour
of the blocks and the application to your needs.
Please note: It is not necessary to change the function block application if the pre-
defined applications fulfill your requirements.
But if you have specific requirements you can enable the customer application mode
and adapt an existing application to your needs or even create your own one.
This is described in the custom application editor manual (see section 'How to get
started').
Compatibility to UMC22
Hardware
The UMC100 is mechanically compatible with the UMC22. The UMC100 does not need more space and
can be used in all situations the UMC22 was used in.
Please note that terminal 12 was previously a static 24 V output. It is now a switchable 24 V output that
can signal a protection trip for example.
Fieldbus Interface
Both devices follow the PNO profile for motor starters regarding their cyclic command and monitoring
telegram. This means the first two bytes within the cyclic telegrams are the same in both devices. But as
the UMC100 provides many new functions, the command and monitoring telegrams are now longer, so
that additional data can be transferred e.g. the status of the inputs of a connected expansion module.
To configure the new functions also the number and organisation of the parameters have changed.
This means that the UMC100 looks different from a control system integration perspective.
It is not possible to just replace the UMC22 with a UMC100. Changes in the device integration packages
are necessary.