Chapter 3
Tropos 1410 Installation Guide
47
Remote mount the BBU on a metal pole
1.
Use the hose clamp to secure the pole bracket to the pole, as shown in
2.
Secure the BBU mounting bracket to the pole bracket. Secure with two each 10-32 screws
(
).
3.
Connect the PoE + LAN output cable from the BBU LAN output port to the LAN port on
the Tropos 1410.
4.
Connect the data and power output cable to the Ethernet port on the Tropos 1410.
5.
Attach the PoE input cable either to the data and output port or to a PS079001 to the power
output cable of a TLP4820.
Note
When the PS079001 is remotely mounted, the data and power out cable supplied with the unit must be
replaced with an outdoor-rated Ethernet cable of sufficient length.