Chapter 2
Tropos 1410 Installation Guide
32
Figure 12
Connecting the Serial Cable to the Tropos 1410
LED Indicator
The Tropos 1410 is equipped with an LED indicator. The LED indicator has three states, as
shown in
6
not used
RS-232 (port 2) TX
7
Power -
not used
8
Power -
not used
Table 4
Serial Pin Assignments (
continued
)
Pin
Option 1 (one serial port)
Option 2 (two serial ports)
Serial port
Ethernet port
Table 5
LED Indicator States
State
Description
Off
The unit has no power or is not operating.
Flashing
The unit has power but is not ready. It may be in the process of associating with
the network or it may not be able to associate with a network.
On
The unit is associated with the network and operating properly.
