ABB Terra AC, Installation Manual

Page: 35 / 76

5 Site preparation
5.1 Select the site
1. Find a suitable site on a wall. For the specifications of the wall, refer to section
11.8 .
2. Make sure that the correct power supply is available. For the power supply
specifications, refer to section 11.11 .
3. Obey the space requirements. Refer to section 11.10.3 .
5.2 Prepare the site (IEC portfolio)
Preliminary requirements
1. The site must be suitable to install the EVSE. Refer to section 5.1 .
Note:
Information for MID certified EVSE:
•
The meter is intended to be installed in a Mechanical Environment
'M1', with Shock and Vibrations of low significance, as per 2014/32/
EU Directive.
• The meter is intended to be installed in Electromagnetic Environment
'E2', as per 2014/32/EU Directive.
Procedure
1. Make sure that the space and the airflow around the EVSE are sufficient. Refer
to section 11.10.3 .
2. Make sure that the correct cables are available at the site.
• AC input cable. Refer to section 11.13 .
• RS485 cable. Refer to section 11.13.4 .
• Ethernet cable. Refer to section 11.13.3 .
5.3 Prepare the site (UL portfolio)
Preliminary requirements
1. The site must be suitable to install the EVSE. Refer to section 5.2 .
Procedure
1. Make sure that the space and the airflow around the EVSE are sufficient. Refer
to section 11.10.3 .
2. Make sure that the correct cables are available at the site.
• AC input cable. Refer to section 11.13.2 .
• RS485 cable. Refer to section 11.13.4 .
• Ethernet cable. Refer to section 11.13.3 .
Site preparation
BCM.V3Y01.0-EN | 002 35