ABB i-bus
KNX
Start-up
20 2CDC501049D0201 Rev. A | SV/S xx.xxx.x.1
3.2
Conversion of previous application program versions
For ABB i-bus
®
KNX devices, it is possible to adopt the parameter settings and group addresses from
earlier versions of the application program from ETS3.
At the time of the market launch of the SV/S 30.640.5.1 and SV/S 30.320.2.1 power supplies there is no
previous version of the application program. However, the conversion function can still be useful to transfer
the parameterization settings and group addresses of one device to another of the same type.
3.2.1
Procedure
•
Import the current VD file into ETS and add a product to the project, using the current application
program.
•
After you have parameterized a device, you can transfer the settings to a second device. For this
purpose, the devices must already be available in the ETS project.
•
Right click on the product and select Conversion in the context menu for this purpose.
•
Then follow the instructions in the dialog window.
•
Finally, you must replace the physical address and delete the old device.
Summary of Contents for SV/S 30.160.1.1
