ABB SACE Emax 2 Installation, Operation And Maintenance Instructions Download Page 78

Page: 78 / 271

ABB | SACE Emax 2

ABB |

1SDH001000R0002 - L7804

Ekip Touch protection release | 6 - Menu

Continued from the previous page

Last Opening measurements

To open the page, from the menu

Measurements

, you need to select

History

Openings

and an opening of the list.

Alternatively, if the main page or a level 2 page is displayed (see the chapter “1 - Layout of the
interface", and the paragraph "Structure of the pages”, on page 57”), you can open the page
relating to the last opening by pressing the

iTEST

key until the page is displayed.

NOTE:

when an opening occurs, the page relating to the last opening is opened

automatically.

The page shows details related to the selected opening. To exit the page, press the

iTEST

key,

which opens the main page.

The page appears as follows:

1885.5A

1903.1A

. . . .

14:07:13:406

n°01

Last Trip

L Protection

Mar 04, 2013

Figure 74

The following table provides a description of the various areas of the page:

Pos.

Description

Name of the page.

Time at which the selected opening occurred (time set on the release at the
moment of the opening)

Date at which the selected opening occurred (date set on the release at the
moment of the opening)

The protection that tripped.

Number of the selected opening.

NOTE

every new opening is associated to an incremental number

Measurements related to the protection tripped, at the time of opening.

Continued on the next page

Summary of Contents for SACE Emax 2
















































































































































































































































































Search results

Summary of Contents for SACE Emax 2

Reviews:

Brands by name

Popular brands

ABB SACE Emax 2, Installation, Operation And Maintenance Instructions

Search results

Summary of Contents for SACE Emax 2

Reviews:

Brands by name

Popular brands