ABB RobotStudio 2022.1 Release Notes Download Page 3

Page: 3 / 30

Release Notes for RobotStudio 2022.1

General

The release name is RobotStudio 2022.1 and the build number is 22.1.9826.0. The release date is March

29, 2022.

User documentation

The RobotStudio Operating Manual is available in all languages except Czech, i.e. English, German,

French, Korean, Chinese, Japanese, Spanish. A selected set of RobotWare manuals are available. Each of

them is available in two versions, one for IRC5 and one for OmniCore.

Tutorials

Tutorials are available at the RobotStudio product pages at

http://www.abb.com/roboticssoftware

System Requirements

Required Software

Microsoft Windows 10 Anniversary Edition or later, 64-bit edition, is required.

The Windows AppInstaller is a pre-requisite for the virtual OmniCore FlexPendant software, see

https://www.microsoft.com/en-us/p/app-installer/9nblggh4nns1

. The App Installer is a default built-in

app in Windows 10, but may have been removed on some PCs.

Sideloading of apps must be enabled on Windows 10 to install the virtual OmniCore FlexPendant.

To enable sideloading follow these steps:

1. Open

Settings.

2. Click

Update & Security

For developers.

3. Under

Use developer features

, select

Sideload apps

Developer mode.

Recommended Hardware

I TE M

RE Q UI RE ME NT

CPU

2.0 GHz or faster processor, multiple cores recommended

Memory

8 GB minimium
16 GB or more if working with large CAD models

Disk

10+ GB free space, solid state drive (SSD)

Graphics
Card¹

High-performance, DirectX 11 compatible, gaming graphics card from any of the leading vendors.
For the Advanced lightning mode Direct3D feature level 10_1 or higher is required.

Screen
Resolution

1920 x 1080 pixels or higher is recommended

Mouse

Three-button mouse

3D Mouse

Any 3D mouse from 3DConnexion, see

http://www.3dconnexion.com

3/30

Summary of Contents for RobotStudio 2022.1































Search results

Summary of Contents for RobotStudio 2022.1

Reviews:

Related manuals for RobotStudio 2022.1

Brands by name

Popular brands

ABB RobotStudio 2022.1, Release Notes

Search results

Summary of Contents for RobotStudio 2022.1

Reviews:

Related manuals for RobotStudio 2022.1

Brands by name

Popular brands