ABB RMDE-01, Product Manual

Page: 29 / 60

Connecting a PC to the 3G modem
The modem consists of four Ethernet ports which can be used to connect the local computer.
In case all the ports are connected to NETA-21 modules, release one for the PC.
Note:
There is no DHCP sever running on RMDE-01 Ethernet devices connected ports. Hence,
you need to set PC IP address to
10.0.0.x network. The recommended IP address is between
10.0.0.54 to 10.0.0.254 .
￭ Setting the IP address in local PC
1. In the Windows Control Panel, open the Network Connections interfaces view or you
can open the Windows Start menu and type
ncpa.cpl and press Enter key.
2. Right-click Local Area Configuration and select Properties .
• Local Area Connection Properties dialog is displayed.
3. Double-click on Internet Protocol Version 4 (TCP/IPv4) .
4. In the Internet Protocol Version 4 (TCP/IPv4) Properties dialog, click Alternate
configuration and select User configured option.
5. Enter the following values:
10.0.0.100 IP address
255.255.255.0 Subnet mask
10.0.0.53 Default gateway
8.8.8.8 or operator specific DNS server Preferred DNS server
<empty> Alternate DNS server
<empty> Preferred WINS server
<empty> Alternate WINS server
6. Click OK to close the dialog.
7. Click OK again to close the network interface configuration.
￭ Testing the modem configuration
1. Connect Ethernet cable between PC and modem.
2. Navigate to modem IP address through web browser (for example, https://10.0.0.53 ).
• Configuration wizard is displayed.
Start-up 29