The MultiCommand Send indication is used to display data from the Local Optical
network (LON).
MultiCommand receive
Main menu/Test/Function status/Communication/Station communication/
MultipleCommandReceive/CM
The MultiCommand Receive indications displayed here show available sets of output
data. Each set of output data has a number of signals. Other information displayed here
shows whether there has been a change in data and whether data is valid.
Horizontal communication via GOOSE for interlocking IntlReceive
Main menu/Test/Function status/Communication/Station communication/
ReceivingInterlInfo/GR
The Receiving Interlock information available here indicates the state of various
apparatus such as whether they are in a closed or open position and if their status is
valid. Several apparatuses can be displayed. There are also indications of reservation
requests, reservation granted and the validity of data and communication.
11.6.14
Setting groups
Main menu/Test/Function status/Setting groups
Displays available setting groups and indicates which of them is in use.
11.6.15
Test
Main menu/Test/Function status/Test
Displays the parameters ACTIVE, OUTPUT and SETTING. The ACTIVE parameter
indicates whether the IED is in test mode or not, the OUPUT parameter indicates
whether test mode has been activated by a binary input and the SETTING parameter
indicates whether or not test mode has been activated by a setting. The output data is
binary (0 or 1).
11.6.16
Authorization
Main menu/Test/Function status/Authorization
Shows if any user is logged on and if any user is blocked by invalid password.
1MRK506276-UUS B
Section 11
Test the IED
93
Operator's manual