1.4.2
Document conventions
GUID-96DFAB1A-98FE-4B26-8E90-F7CEB14B1AB6 v8
•
Abbreviations and acronyms in this manual are spelled out in the glossary. The glossary
also contains definitions of important terms.
•
Push button navigation in the LHMI menu structure is presented by using the push button
icons.
For example, to navigate between the options, use
and
.
•
HMI menu paths are presented in bold.
For example, select Main menu/Settings.
•
LHMI messages are shown in Courier font.
For example, to save the changes in non-volatile memory, select Yes and press
.
•
Parameter names are shown in italics.
For example, the function can be enabled and disabled with the
Operation setting.
•
Each function block symbol shows the available input/output signal.
•
the character ^ in front of an input/output signal name indicates that the signal
name may be customized using the PCM600 software.
•
the character * after an input signal name indicates that the signal must be
connected to another function block in the application configuration to achieve a
valid application configuration.
•
Dimensions are provided both in inches and millimeters. If it is not specifically mentioned
then the dimension is in millimeters.
Section 1
1MRK 500 125-UEN A
Introduction
10
Operation manual
