5.3.4
Side-by-side 19” rack mounting
IP10323-1 v1
5.3.4.1
Overview
M11974-3 v3
IED case size 1/2 x 19” and RHGS cases can be mounted side-by-side up to a maximum size of
19”. For side-by-side rack mounting, the side-by-side mounting kit together with the 19” rack
panel mounting kit must be used. The mounting kit has to be ordered separately.
Use only the screws included in the mounting kit when mounting the plates and
the angles on the IED. Screws with wrong dimension may damage the PCBs
inside the IED.
5.3.4.2
Mounting procedure for side-by-side rack mounting
M11955-2 v4
IEC040004563enOriginal.vsdx
1
2
3
4
3
IEC04000456 V3 EN-US
Figure 7:
Side-by-side rack mounting details.
The required torque for the screws is 3.5 Nm.
PosNo
Description
Quantity
Type
1
Mounting plate
2
-
2, 3
Screw
16
M4x6
4
Mounting angle
2
-
5
Washer
16
M4x6
5.3.4.3
IED mounted with a RHGS6 case
M11953-3 v4
A 1/2 x 19” size IED can be mounted with a RHGS case (6 or 12). The RHGS case can be used for
mounting a test switch of type RTXP 24. It also has enough space for a terminal base of RX 2
type for mounting of, for example, a DC-switch or two auxiliary relays.
Section 5
1MRK 514 027-UEN D
Mounting
24
650 series
Installation manual
© Copyright 2017 ABB. All rights reserved
