M2695-2 v2
Always transport PCBs (modules) using certified conductive bags.
M2696-2 v1
Do not connect live wires to the IED. Internal circuitry may be damaged
M2697-2 v2
Always use a conductive wrist strap connected to protective earth when
replacing modules. Electrostatic discharge (ESD) may damage the module and
IED circuitry.
M2698-2 v2
Take care to avoid electrical shock during installation and commissioning.
M2693-2 v1
Changing the active setting group will inevitably change the IEDs operation. Be
careful and check regulations before making the change.
2.4
Note signs
IP1497-1 v1
M19-2 v3
Observe the maximum allowed continuous current for the different current
transformer inputs of the IED. See technical data.
1MRK 514 027-UEN D
Section 2
Safety information
650 series
13
Installation manual
© Copyright 2017 ABB. All rights reserved
