ABB Relion 630 Series, Communication Protocol Manual

Page: 90 / 304

Table 36: DSTPDIS Logical node data (instance 4)
DO name DO type DA name FC T Signal Mon/C
md
Description
Beh a_dINS stVal ST - Beh Mon Behaviour parameter for 61850
q ST - Beh Mon Quality: Behaviour parameter for
61850
t ST - Beh Mon Timestamp: Behaviour parameter
for 61850
Op b_dACT general ST T OPERATE_ZAR1 Mon Time delayed operate signal, Zone
AR1
q ST T OPERATE_ZAR1 Mon Quality: Time delayed operate
signal, Zone AR1
t ST T OPERATE_ZAR1 Mon Timestamp: Time delayed operate
signal, Zone AR1
Str c_dACD general ST - START_ZAR1 Mon General start-signal, Zone AR1
dirGeneral ST - - Mon Direction of fault or load when
START_ZAR1 is active
phsA ST - - Mon Event start phase A, Zone AR1
dirPhsA ST - - Mon Direction of phase A when phase
start is active, Zone ZAR1
phsB ST - - Mon Event start phase B, Zone AR1
dirPhsB ST - - Mon Direction of phase B when phase
start is active, Zone ZAR1
phsC ST - - Mon Event start phase C, Zone AR1
dirPhsC ST - - Mon Direction of phase C when phase
start is active, Zone ZAR1
q ST - START_ZAR1 Mon Quality: General start-signal, Zone
AR1
t ST - START_ZAR1 Mon Timestamp: General start-signal,
Zone AR1
Mod c_dINC stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter for
61850
t ST - - Mon Timestamp: Mode status
parameter for 61850
IvdTltAng v1_dINS stVal ST - CONFLICT_ZAR1 Mon Tilt angle validity check, Zone AR1
q ST - CONFLICT_ZAR1 Mon Quality: Tilt angle validity check,
Zone AR1
t ST - CONFLICT_ZAR1 Mon Timestamp: Tilt angle validity
check, Zone AR1
Section 7
1MRS756793 E
Logical node data model
84 630 series
Communication Protocol Manual