ABB Relion 630 Series, Communication Protocol Manual

Page: 268 / 304

DO name DO type DA name FC T Signal Mon/C
md
Description
SeqA c_dSEQ
t MX - I2_DB Mon Timestamp: Negative sequence
current amplitude, reported value
t MX - I2_DB Mon Timestamp: Negative sequence
current amplitude, reported value
subEna SV - - - Enable substitution
subEna SV - - - Enable substitution
db CF - Ps Seq A deadband - Cycl: Report interval (s), Db: In %
of range, Int Db: In %s
db CF - Ng Seq A deadband - Cycl: Report interval (s), Db: In %
of range, Int Db: In %s
zeroDb CF - Ps Seq A zero Db - Zero point clamping in 0,001% of
range
zeroDb CF - Ng Seq A zero Db - Zero point clamping in 0,001% of
range
LN type LN prefix LN class Function block name
VSMSQI (revision 0) VS MSQI VSMSQI
Table 181: VSMSQI Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - - Cmd Mode parameter for 61850
Oper.origin.orCat CO - - Cmd Mode parameter for 61850
Oper.origin.orIdent CO - - Cmd Mode parameter for 61850
Oper.ctlNum CO - - Cmd Mode parameter for 61850
Oper.T CO - - Cmd Mode parameter for 61850
Oper.Test CO - - Cmd Mode parameter for 61850
Oper.Check CO - - Cmd Mode parameter for 61850
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter for
61850
t ST - - Mon Timestamp: Mode status
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter for 61850
q ST - Beh Mon Quality: Behaviour parameter for
61850
t ST - Beh Mon Timestamp: Behaviour parameter
for 61850
SeqV c_dSEQ rangeC.hhLim.f CF - Ps Seq V Hi high Lim - High High limit (physical value)
rangeC.hLim.f CF - Ps Seq V high limit - High limit (physical value)
rangeC.lLim.f CF - Ps Seq V low limit - Low limit (physical value)
rangeC.llLim.f CF - Ps Seq V low low Lim - Low Low limit (physical value)
Table continues on next page
Section 7
1MRS756793 E
Logical node data model
262 630 series
Communication Protocol Manual