User manual |
PowerValue 11 RT 6-10kVA 31
Figure 35 shows an overview on how to navigate the control
menu.
Figure 35: Control menu tree
Control
Identification
Settings
Buzzer mute
Turn off single
UPS
Single UPS battery
test
Clear EPO status
Reset fault state
Clear event log
Restore factory
settings
Parallel UPS
battery test
Buzzer mute: no
Single UPS turn off:
no
Status: battery test ok
Schedule battery test: no
Status: EPO active
Clear: no
Status: fault active
Reset fault: no
Total events: 50
Clear event log: no
Reset: no
Status: battery test ok
Schedule battery test: no
or
or
or
or
or
or
or
or
1 UPS system
Parallel system
1 UPS system
Parallel system
4.4.2.4 Identification
The identification menu shows the UPS serial number,
firmware serial number and model type. Press
to navigate
through the Identification menu. Press for longer that one
second to return to the previous main menu.
Identification
Settings
Type/Model:
ABB UPS
UPS PowerValue 11 RT
Serial Number:
XXXXXXXX
UPS firmware:
XXXX_XX
or
or
or
or
Figure 36: Identification menu tree
4.4.2.5 Settings
Contact your local distributor for further information before
using the settings.
Some settings in the Settings menu impact the performance
of the UPS and others enable and disable functions within
the UPS. Failures and reduced protection can occur if the
equipment is not set in an adequate way.
NOTE
MOST SETTINGS SHOULD BE DONE ONLY WHEN
THE UPS IN BYPASS-MODE.
