User manual |
PowerValue 11 RT 6-10kVA 9
3.2.3
Rack mount installation
Note that you need a rack mounting kit (purchased separately)
for this operation.
To install the UPS to a rack:
1. Identify the rail holes in the rack for positioning the
cabinet. Position the rails in the bottom of the 3U space
for 6kVA units and 5U space for 10kVA units.
2. Slide the cabinet into the rack as shown in Figure 1.
Figure 1: Rack mount installation
If installing additional UPS units, repeat the steps above for
each cabinet.
3.2.2.1 Connecting the external battery modules
PowerValue 11 RT 6kVA
To connect the external battery modules:
1. Remove the front panels of the UPS and of the external
battery modules.
2. Plug the external battery enclosure cable into the UPS
battery connector as shown in Figure 2.
3. Position and screw on the UPS and the battery module
front panels.
Figure 2: Battery module connections