ABB PCM600 Getting Started Manual Download

Page: 17 / 68

The

Output

window shows log information about the PCM600 events.

2.1.2

Tool components

The availability of the tool components depends on the selected IED and the installed
connectivity packages.

Table 1:

Tool components in PCM600

Tool component

Description

Update Manager

Update Manager is used for downloading updates

and managing the current installation of PCM600

and connectivity packages.

Project Explorer

Project Explorer is used for navigating, creating a

plant structure, importing and exporting IED

configurations, accessing and filtering the content

of other tool components.

(Graphical) Application Configuration

Application Configuration is used for configuring

the IEDs.

Parameter Setting

Parameter Setting is used for parameterizing the

IEDs and viewing the parameter data for the

selected node.

Signal Matrix

Signal Matrix is used to create connections

between source and target objects in an IED

configuration.

Signal Monitoring

Signal Monitoring is used for monitoring online the

measured values and the status of the binary input

and output signals of an IED and for

commissioning and testing physical connections.

Disturbance Handling

Disturbance Handling is used for uploading and

processing the disturbance files located in a

specific IED, for viewing and processing the

disturbance recording data and creating reports.

Ethernet Configuration

Ethernet Configuration is used to configure the

Ethernet ports both online and offline.

Ethernet configuration can be used to configure

access points, merging unit and routers in the

respective tabs of Ethernet configuration.

Event Viewer

Event Viewer displays the actual events stored in

an IED.

Graphical Display Editor

Graphical Display Editor is used for configuring the

graphical display of an IED.

Hardware Configuration

Hardware Configuration is used for viewing,

adding and changing the hardware modules of an

IED and for troubleshooting the IED hardware

configuration.

Communication Management

Communication Management is used for

configuring communication protocols for an IED

and for mapping IED signals and outputs.

IEC 61850 Configuration

IEC 61850 Configuration is used for viewing the

IEC 61850 data flow configuration and for

engineering the dataflow between the IEDs and

IEC 61850 clients.

IED Compare

IED Compare is used for comparing the IED

configuration of two same type of IEDs.

1MRS757866 C

Section 2

Overview

PCM600

Getting Started Guide

Summary of Contents for PCM600




































































Search results

Summary of Contents for PCM600

Reviews:

Related manuals for PCM600

Brands by name

Popular brands

ABB PCM600, Getting Started Manual

Search results

Summary of Contents for PCM600

Reviews:

Related manuals for PCM600

Brands by name

Popular brands