ABB OmniCore C30 Operating Manual Download Page 83

Page: 83 / 236

Servo module page

The following figure and table describes the options available in the

Servo module

page of the

SmartGripper

settings.

xx2000001328

Description

Parameter

Group

Calibrates the gripper at the current position.

Calibrate

Setup

Sets the movement speed of the gripper fingers.

Speed

Sets the gripping force of the gripper fingers.

Force

Allows you to manage the gripper finger move-
ment.

Note

If the gripper is not calibrated, only the functions

Jog

and

Stop

can be used, and the functions

Grip+

Grip-

and

Move To

are disabled.

Jog/Stop/Grip+/Grip-
/Move to

Command

Displays the calibration status of the gripper.

Calibration

Status

Displays the current position of the gripper.

Current position

Indicates the state of the gripper. For details
about the gripper states, see

Returned value

IRB 14050 gripper Product manual

Current state

Continues on next page

Operating manual - OmniCore

3HAC065036-001 Revision: E

5 Jogging

5.9.1 Introduction

Continued

Summary of Contents for OmniCore C30












































































































































































































































Search results

Summary of Contents for OmniCore C30

Reviews:

ABB OmniCore C30, Operating Manual, Page: 83 / 236

Search results

Summary of Contents for OmniCore C30

Reviews: